|
Product Details:
|
| Roduct Name: | Hydroprocessing Catalyst | Appearance: | Clover Extrudate |
|---|---|---|---|
| Particle Size(mm): | ∮1.6 Or 3.0 | Crushing Strength: | N/cm ≥150 |
| Bulk Density,(kg/L): | 0.80-0.85 | Surface Area(m2/g): | 150 |
| High Light: | hydrotreating catalyst,solid phosphoric acid catalyst |
||
Hydroprocessing catalyst secondary processing low-grade gasoline and diesel
Promoted composite alumina as the carrier, carrying the metal components and additives, such as Molybdenum, Tungsten, cobalt, and Nickel,JL-H-25 possesses the characteristics of excellent desulphurization, denitrogenation, dearsenization, removal aromatic hydrocarbon and removal colloid at low-pressure hydrogenation. The product has high crushing strength, and what is more, it can be regenerated. There isn’t easily-lost active component in the product. Thus, it will not cause corrosion of the equipment. Besides, it has good activity and stability. The actual industrial packing density is lower than the same product in China, so it can significantly reduce the cost of loading catalyst.
Application:
It applies to secondary processing low-grade gasoline and diesel. At the middle-low pressure, catalytic diesel of pipeline oil residue oil, and coke kerosene etc of Shengli, Liaohe, Xinjiang, Central Plains , Gudao, Luning etc. can achieve satisfactory results .It can produce ultra-low sulfur and low aromatic high-quality diesel. The product has been applied in multiple sets industrial plants successfully.
Physical and chemical properties:
| Items | index | items | index |
| Appearance | Clover extrudate | Pore volume,ml/g | ≥0.29 |
| Particle size(mm) | ∮1.6 or 3.0 | Cobalt oxide(CoO)content % | 2.8-3.8 |
| Crushing strength | N/cm ≥150 | Molybdenum trioxide(MoO3)content % | 18-22 |
| Bulk density,(kg/L) | 0.80-0.85 | Tungsten trioxide(WO3)content % | 6-8 |
| Surface area(m2/g) | 150 | Nickel oxide(NiO)content% | 1.5-2.5 |
Activity index:
Process parameters |
Hydrogen partial pressure,Mpa | Temperature,℃ | Space velocity,hr-1 | Hydrogen to oil volume ratio, V/V |
| 6.0 | 360 | 2.0 | 800 | |
| Feedstock | High sulfur diesel, the sulfur content about 20000ppm. | |||
| Resultant | Sulfur content no higher than 300ppm | |||
Reference conditions:
Process conditions Feedstock types |
Hydrogen partial pressure (Mpa) | Reactor inlet temperature (℃) |
Space velocity (hr-1) |
Hydrogen to oil volume ratio, ( V/V) |
| Xinjiang, Shengli and pipeline catalytic diesel | 3.0-6.0 | 260-300 | 1.0-20. | 400-600 |
| catalytic diesel of Pipeline oil blending residue | 3.0-6.0 | 270-310 | 1.0-2.0 | 400-600 |
| Daqing coke kerosene | 3.0-6.0 | 280-320 | 1.0-2.0 | 500-800 |
| Shengli coke kerosene | 6.0 | 290-330 | 1.0-1.5 | 600-800 |
Packing: iron drums innerlining double-layer plastic bags.
Contact Person: Mr. James.Li
Tel: 86-13706436189
Fax: 86-533-6076766
